✔ GP Suspension 25mm 2” over cartridge kit, DLC coated 2” over tubes + full fork rebuild
✔ 1” lift block on Öhlins rear suspension to match
✔ Custom exhaust bracket to clear 14” Öhlins rear shocks
✔ Radial mounted Brembo calipers with GBrakes rotors
✔ S&S 128” Big Bore kit (M8)
✔ S&S 550 cam, plate oil pump and hydraulic lifters
✔ S&S adjustment pushrods
✔ Daytona M8 fuel injectors (6.2g set)
✔ Fuel Moto Power Vision Custom Tune
✔ Baker GrudgeBox install
✔ Rekluse APEX clutch + basket (M8)
✔ Alloy Art Chain drive conversion
✔ Vity’s swingarm, clutch cover, & saddlebag install
✔ Santoro Not Yo Daddy’s crash bar + bag guards (black)
✔ Speaker upgrade and Kicker lids with 4 channel amp
✔ Dakota Digital gauges throughout
✔ EmbeeUSA custom cerakote:
• Semi-gloss black bolts
• Kickstand bracket
• Engine mount
• Red pressure plate
• Gold Trask intake trimm
(disassembly, reassembly & transport included)

✔️ Fueling Parts cam, cam plate, oil pump, valves and springs, pushrods
✔️Supersprox stealth sprocket chain conversion
✔️Dynaright chain tensioner
✔️ Arlen Ness Method fork brace install
✔️ custom LePera seat
✔️ custom LEDs and mounts
✔️ custom mounted and shaped front fairing
✔️ suspension work and new shocks
✔️ exhaust
✔️ intake
✔️ brakes and rotors
✔️ Kinetic structures motor mounts
✔️ internally wired bars and risers
✔️ Flo levers, pegs, brake and shifter levers
✔️ Dakota digital speedo and custom mount

✓ Motor work: Feuling Parts cams, cam plate, oil pump with S&S big bore, valves & springs, lifters and adjustable push rods
✓ GigaCycle Garage inverted front end kit install
✓ Chain conversion
✓ Dynaright chain tensioner
✓ Supersprox rear sprocket
✓ Barnett Scorpion lock-up clutch and basket
✓ Internally wired risers converted to run 1 1/8” ODI dirt bike bars and custom controls, Brembo 7/8” front master cylinder and adjustable lever, Pro Taper adjustable easy-pull two finger clutch setup
✓ Bassani full exhaust
✓ Intake and tune
✓ Custom formed and mounted front fairing and LED headlight with hi-beam light bar
✓ Custom shaped rear fender with internally mounted license plate and rear LED lights
✓ K-tech Razor 14.5” rear shocks
✓ Custom rims and wheels
✓ Galfer rotors front and rear
✓ TC Bros mid controls
✓ Dakota Digital Speedo install with custom mid riser mount
✓ Kinetic Structures wire mesh engine mounts
✓ Saddleman seat

✓ Entire bike stripped down and sent to powder coat and paint
✓ All painted parts reassembled with new seals, bearings and gaskets
✓ Swapped wide glide 41mm front end for +2” late model Dyna 49mm setup (narrow triple trees)
✓ Custom made high mounted rear fender with integrated license plate frame and all-in-one LED signals
✓ Custom made exhaust and brackets
✓ Custom shaped and mounted quarter fairing
✓ Mid control conversion with TC Bros kit and inner primary modification for shift lever shaft
✓ Custom passenger peg mounts to accommodate upswept muffler
✓ Chain conversion
✓ Dynaright chain tensioner
✓ Completely rewired with updated relays and fuses
✓ Gear driven cams
✓ Mikuni HSR install and tune
✓ Runout checked and pushrods adjusted
✓ Suspension work and shock install
✓ 7/8” bar conversion with Brembo master cylinder
✓ Custom clutch and throttle cables with Pro Taper clutch lever and throttle setup
✓ CRG BlindSight mirror install, adjustable levers, and mini switches
✓ Custom made dash pad and tank risers
✓ Custom LED lighting and brackets throughout
✓ New EBC brake rotors and pads
✓ Intake install

✔️Rocket Cams 474 grind
✔️Feuling HP+ cam chest kit oil system with new bearings, gaskets, and seals; engine runout checked and recorded
✔️ Feuling cam chain tensioner, HP+ pushrods, lifters and lifter cuffs - installed and adjusted; rocker box breathers replaced
✔️Power Vision 3‍ ‍+ custom map

✓ S&S Cam Chest Kit, Oil Pump, Hydraulic Tensioners  
✓ 474 Rocket Cams
✓  PV3 + Tune
✓ GP Suspension 25mm 2” Over Cartridge Kit
✓ GP Suspension Rear Shocks
✓ Thrashin Supply 9.5" Pullback Risers internally wired
✓ GBrakes Wave Rotors
✓ Burly Brand Easyboy Clutch Kit
✓ Energy One Clutch Pack
✓ Alloy Art Bushings
✓Custom Cerakote by Embee Performance

Custom mixed 3-color gold Cerakote by Embee USA:

   Bolt covers, caliper buttons, risers, gauge mount/brackets, suspension reservoir mounts, gas cap, dipsticks, intake, saddlebag hardware, Flo Moto levers, brake    caliper covers, lower rocker box cover 

✔Fueling HP+ Camchest & Oil Pump Kit 
✔Woods Camshafts
✔Power Vision 3 with custom tune
✔Front Fork Rebuild with Progressive Front Cartridge Kit
✔Progressive Rear Shocks

✓ S&S cam chest kit , oil pump & hydraulic cam chain tensioner
✓474 Rocket cams
✓ Power Vision 4 install & custom tune
✓ Handlebar risers
✓ Wiring extensions for bars

✓ FEULING HP+ conversion camplate hydraulic cam chain tensioner kit with billet oil pump, HP+ lifters, and FEULING 525 REAPER conversion chain drive camshafts
✓ Top end rebuilt (stock 88) – valves, seals, and springs replaced and shimmed for cam and lifter setup
✓ BAKER DD6 Direct Drive 6-Speed transmission swap with 28-tooth compensator sprocket and speedometer recalibration
✓ Transmission completely rebuilt with BAKER Builders Kit upgraded bearings and seals
✓ Primary drive rebuilt with upgraded seals and bearings, Barnett Scorpion lock-up clutch, easy-pull ramps, and 2-finger clutch lever
✓ Chain drive conversion with Supersprox Stealth sprocket
✓Dynaright Chain Tensioner
✓ Custom front suspension and triple clamps with optimized rake and trail
✓ WP Suspension 48mm inverted front end, fully adjustable, re-valved, and custom sprung for the build
✓ Brembo braking system – radial-mounted twin front calipers and oversized front master cylinder
✓ K-Tech Razor rear suspension (14”) – custom-built, fully adjustable height, rebound, compression, and damping
✓ Kinetic Structures wire-mesh engine mounts front and rear to eliminate wobble and stabilize engine-to-frame connection
✓ Stealth 2-into-1 performance exhaust
✓ Arlen Ness Big Sucker intake
✓ Power Commander ECU with custom dyno tune after full build
✓ High-output fuel pump and fuel filter, Accel Super Coil, new spark plugs and wires
✓ New stator, regulator, starter with backup push-button, and 500 CCA lithium battery
✓ Converted 13-spoke wheels with Vulcan Works bearing conversions and Pirelli Night Dragon tires
✓ Custom internally wired 1-1/8” handlebars and risers, low-profile controls, and adjustable front brake lever
✓ Custom formed front clamshell fairing with storage bag and rear-view 180° camera system
✓ Custom rear fender and removable Thrashin saddlebags with molded ABS mounts to prevent sagging
✓ Dakota Digital LED speedometer and LED fuel gauge
✓ Custom LED lighting throughout – headlight, switch-activated light bar, signals, and plate light
✓ Custom paint – TCP Burgundy Hot Rod Flatz (flat matte satin) with satin black
✓ Saddlemen 2-up seat with custom paint-matched stitching

✔️ Custom made exhaust
✔️ New rear suspension
✔️ Front forks rebuilt with new springs
✔️ Arlen Ness 15” big brake kit and Brembo caliper install
✔️ Thrashin Supply internally wired risers, bars, grips, and gauge mount
✔️ Relocate Speedo and tach from tank to bar mounted
✔️ Custom made tank cover with built in phone mount and charger
✔️ Saddleman seat
✔️ Big Sucker intake
✔️ Mikuni carb install and tune
✔️ Crash bar install

✔️ Front forks Ohlins cartridge install and setup
✔️ Rear Ohlins shock install with riser and frame modifications to fit
✔️ Intake install and tune
✔️ Baja Designs LP4 headlight install and mount
✔️ Riser install with internal wiring and extensions
✔️ Crash bar install

✔️ full restoration
✔️ custom exhaust
✔️ suspension rebuild in the front
✔️ new shocks in the rear
✔️ carb rebuild and tune
✔️ handlebar install with internal wiring

✔️ Complete restoration of the Softail Springer + matching original sidecar
✔️ Full teardown and rebuild of motor and frame
✔️ Wired, installed, and set up the sidecar
✔️ Tuned and set suspension for both bike and sidecar

✔️574 Rocket Cams
✔️Fueling HP+ Cam Chest Kit
✔️Fueling HP+ Lifters
✔️Fueling Beehive Valve Springs
✔️PV3 + Custom  Tune

✔️ Custom brake setup front and rear
✔️ 2” over gold fork tubes w/ drop-in cartridges
✔️ Custom LED light bar
✔️ Extended windscreen install
✔️ Gold handlebar & riser install
✔️ Crash bar install
✔️ Custom rear plate + signal install & wiring

✔️ Full restoration build
✔️Dynaright chain tensioner
✔️ Complete motor teardown & rebuild w/ all new Fueling parts
✔️ Leather Pro bags
✔️ Body and tank work
✔️ Rewired + repaired full electrical system
✔️ Restored & powder-coated hard parts
✔️ New rear suspension
✔️ New brake system
✔️ Rebuilt front suspension w/ drop-in cartridges

✔️ Custom Öhlins suspension front and rear
✔️ Custom-cut carbon fiber front & rear fenders by Hoffman Designs
✔️ New full sound system
✔️ Jade Affiliated custom rims w/ Galfer + Brembo brake setup
✔️ Custom paint throughout
✔️ Chain drive conversion
✔️ Motor work and tune
✔️ Handlebars, risers, floorboards & controls swap
✔️ Speedo relocation

✔️Full front suspension upgrade
✔️GP suspension cartridges
✔️ 2” over black fork tubes
✔️ Arlen Ness fork brace
✔️fork rebuild
✔️Ohlins rear shocks
✔️Custom mounted and wired Dakota Digital gauge
✔️Custom front and rear lighting
✔️Thrashin supply bags 
✔️Custom mounted LePera Kickflip seat 

✔474 Rocket Cams
✔Fueling HP+ Lifters
✔Fueling HP+ Oil Pump & Cam Plate Kit
✔Fueling Cam Chain Tensioner
✔Custom Tune